Information needed when ordering your filters can start by simply providing:
- The OEM of the dust collector
- The needed part’s OEM number
If you do not have a part number, do you have filter bags or filter cartridges?
FILTER BAGS
- How does the dust collector clean? Pulse Jet, Shaker, or reverse air?
- What is the flat width of the bag? Lay the bag flat on the floor and measure across bag; Or you may measure across the cage.
- What is the top-to-bottom length?
- How is the top and bottom sewn?
- Different tops are Snap Band, Raw Edge, and Grommet, Loop, Loop strap, A-Hanger, Cord, Flange.
- Different bottoms are Disc, Disc with Wear Strip, Sewn Flat, Disc with Hole. Some bags have a support ring in the bag towards the top (these are only used in shaker units).
- What kind of material are the bags made of? Does it feel like the your denim jean material or a felt type of material?
- How many filters are in the dust collector?
DUST COLLECTOR CARTRIDGE FILTERS
- What is the Inside Diameter (ID) of the Cartridge?
- What is the Outside Diameter (OD) of the Cartridge?
- What is the length of the Cartridge?
- Is the Cartridge Open/Open, Open/Total Closed, or Open/Closed with a bolt hole?
- Is there a gasket on the filter?
- Is there a metal screen on the outside of the filter?
- What kind of media is in the filter? Paper, 80/20, or spun bond?
- How many cartridges are there in dust collector?
In regard to the CONCRETE INDUSTRY, the most OEM’s are:
- Con-E-Co
- C&W
- Ross
- Stevens
- McNeilus
- Griffin
- Vance Hagen
- Johnson Ross
- Murphy Roger
